- 您现在的位置：买卖IC网 > Sheet目录1246 > SR1K20M155X (EPCOS Inc)VARISTOR 20VRMS W/RFI SUPP RAD
Leaded transient voltage/RFI suppressors (SHCVs)
SHCV series
Specified values only apply to CTVS components that have not been subject to prior electrical,
mechanical or thermal damage. The use of CTVS devices in line-to-ground applications is
therefore not advisable, and it is only allowed together with safety countermeasures like
thermal fuses.
Storage
Only store CTVS in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature
25 to +45 ° C, relative humidity ≤ 75%
annual average, maximum 95%, dew precipitation is inadmissible.
Do not store CTVS devices where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or CTVS may stick together, causing problems during
mounting.
Avoid contamination of the CTVS surface during storage, handling and processing.
Avoid storing CTVS devices in harmful environments where they are exposed to corrosive
gases for example (SO x , Cl).
Use CTVS as soon as possible after opening factory seals such as polyvinyl-sealed packages.
Solder CTVS components after shipment from EPCOS within the time specified:
CTVS with Ni barrier termination, 12 months
CTVS with AgPd and AgPt termination, 6 months
SHCV and CU series, 24 months
Handling
Do not drop CTVS components and allow them to be chipped.
Do not touch CTVS with your bare hands - gloves are recommended.
Avoid contamination of the CTVS surface during handling.
Mounting
When CTVS devices are encapsulated with sealing material or overmolded with plastic
material, electrical characteristics might be degraded and the life time reduced.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with CTVS components are clean before
mounting.
The surface temperature of an operating CTVS can be higher. Ensure that adjacent
components are placed at a sufficient distance from a CTVS to allow proper cooling.
Avoid contamination of the CTVS surface during processing.
Multilayer varistors (MLVs) with AgPd termination are not approved for lead-free soldering.
Soldering
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 29
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
SRP120LF
POLYSWITCH PTC RESET 1.2A STRAP
SRP120SF
POLYSWITCH PTC RESET 1.2A STRAP
SRP175F
POLYSWITCH STRAP 1.75A HOLD
SRP200F
POLYSWITCH STRAP 2.00A HOLD
SRP350F
POLYSWITCH STRAP 3.50A HOLD
SS-5-800MA-BK
FUSE 800MA 250VAC RADIAL SLOW
SSC02SYAN
CONN JUMPER SHORTING GOLD
SSG5X1
SWITCHING SPARK GAP 5KV AXIAL
相关代理商/技术参数
SR1K20M155Z
制造商:EPCOS 制造商全称:EPCOS 功能描述:Combination of a multilayer ceramic capacitor and a multilayer varistor, leaded
SR1K20M225X
制造商:EPCOS 制造商全称:EPCOS 功能描述:Ceramic transient voltage suppressors
SR1K20M225Z
制造商:EPCOS 制造商全称:EPCOS 功能描述:Combination of a multilayer ceramic capacitor and a multilayer varistor, leaded
SR1K20M474X
功能描述:VARISTOR 20VRMS W/RFI SUPP RAD RoHS:是 类别:过电压，电流，温度装置 >> TVS - 变阻器，MOV 系列:SHCV 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向，盒式
SR1LARU
功能描述:Supervisor Open Drain or Open Collector 1 Channel 6-UDFN (1.45x1) 制造商:stmicroelectronics 系列:Smart Reset?? 包装:剪切带（CT） 零件状态:有效 类型:重置计时器 受监控电压数:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:可调节/可选择 电压 - 阈值:可调节/可选择 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:6-UDFN 供应商器件封装:6-UDFN（1.45x1） 标准包装:1
SR1M
制造商:EIC 制造商全称:EIC discrete Semiconductors 功能描述:SURFACE MOUNT FAST RECOVERY RECTIFIERS
SR1MAN01DE
制造商:UNBRANDED 功能描述:USER GUIDE GERMAN DE
SR1MAN01ES
制造商:UNBRANDED 功能描述:USER GUIDE SPANISH ES